GetPressureDirichletBCPointer
This routine returns the pointer to Dirichlet boundary condition of pressure field in AbstractSteadyStokes_ kernel, that is obj%DBCForPressure(dbcNo)%ptr.
- After obtaining the Dirichlet boundary condition pointer, user can set the boundary condition
dbcNoshould be lesser than total dirichlet boundary condition
Interface
INTERFACE
MODULE FUNCTION GetPressureDirichletBCPointer(obj, dbcNo) RESULT(ans)
CLASS(AbstractSteadyStokes_), INTENT(INOUT) :: obj
INTEGER(I4B), INTENT(IN) :: dbcNo
!! Dirichlet boundary nunber
CLASS(DirichletBC_), POINTER :: ans
END FUNCTION GetPressureDirichletBCPointer
END INTERFACE
Example
In this example we will learn how to add pressure and velocity dirichlet boundary condition
PROGRAM main
USE easifemBase
USE easifemClasses
USE easifemMaterials
USE easifemKernels
USE SteadyStokes111_Class
IMPLICIT NONE
TYPE( SteadyStokes111_ ) :: obj
TYPE( ParameterList_ ) :: param
TYPE( HDF5File_ ) :: domainFile
TYPE( Domain_ ) :: dom
INTEGER( I4B ), PARAMETER :: refPressureNode=2
REAL( DFP ), PARAMETER :: refPressure = 0.0_DFP
INTEGER( I4B ), PARAMETER :: tDirichletBCForVelocity = 2
INTEGER( I4B ), PARAMETER :: tDirichletBCForPressure = 0
INTEGER( I4B ), PARAMETER :: tFluidMaterials= 1
INTEGER( I4B ), PARAMETER :: stabParamOption= 1
LOGICAL( LGT ), PARAMETER :: isSubscalePressure = .FALSE.
LOGICAL( LGT ), PARAMETER :: isBoundarySubscale = .FALSE.
REAL( DFP ), PARAMETER :: gravity(3)=[0.0, -9.8, 0.0]
LOGICAL( LGT ), PARAMETER :: isConservativeForm = .TRUE.
CHARACTER( * ), PARAMETER :: engine="NATIVE_SERIAL"
CHARACTER( * ), PARAMETER :: domainFileName="./long_pipe_tri3.h5"
INTEGER( I4B ), PARAMETER :: CoordinateSystem = KERNEL_CARTESIAN
INTEGER( I4B ), PARAMETER :: maxIter = 100
REAL( DFP ), PARAMETER :: rtoleranceForPressure = 1.0E-6
REAL( DFP ), PARAMETER :: rtoleranceForVelocity = 1.0E-6
REAL( DFP ), PARAMETER :: atoleranceForPressure = 1.0E-6
REAL( DFP ), PARAMETER :: atoleranceForVelocity = 1.0E-6
REAL( DFP ), PARAMETER :: toleranceForSteadyState = 1.0E-6
CHARACTER(*), PARAMETER :: baseInterpolationForSpace="LagrangeInterpolation"
CHARACTER(*), PARAMETER :: baseContinuityForSpace="H1"
CHARACTER(*), PARAMETER :: quadratureTypeForSpace="GaussLegendre"
INTEGER(I4B), PARAMETER :: ls_solverName = LIS_GMRES
INTEGER(I4B), PARAMETER :: ls_preconditionOption= LEFT_PRECONDITION
INTEGER(I4B), PARAMETER :: ls_convergenceIn = convergenceInRes
INTEGER(I4B), PARAMETER :: ls_convergenceType = relativeConvergence
INTEGER( I4B ), PARAMETER :: ls_maxIter = 100
LOGICAL( LGT ), PARAMETER :: ls_relativeToRHS = .TRUE.
INTEGER( I4B ), PARAMETER :: ls_KrylovSubspaceSize=20
REAL( DFP ) , PARAMETER :: ls_rtol=1.0E-10
REAL( DFP ) , PARAMETER :: ls_atol=1.0E-10
TYPE( MeshSelection_ ) :: region
INTEGER( I4B ), PARAMETER :: fluid_meshID(1) = [1]
REAL( DFP ), PARAMETER :: fluid_massDensity=1000.0
REAL( DFP ), PARAMETER :: fluid_dynamicViscosity=0.001_DFP
CHARACTER( LEN = * ), PARAMETER :: fluid_stressStrainModel="NewtonianFluidModel"
CLASS( DirichletBC_ ), POINTER :: dbc => NULL()
Set parameters for kernel.
CALL FPL_INIT(); CALL param%Initiate()
Set parameters for the kernel.
CALL SetSteadyStokes111Param( &
& param=param, &
& isConservativeForm=isConservativeForm, &
& gravity = gravity, &
& isSubscalePressure = isSubscalePressure, &
& isBoundarySubscale = isBoundarySubscale, &
& stabParamOption = stabParamOption, &
& domainFile = domainFileName, &
& engine=engine, &
& CoordinateSystem=KERNEL_CARTESIAN, &
& maxIter =maxIter, &
& rtoleranceForPressure = rtoleranceForPressure, &
& rtoleranceForVelocity = rtoleranceForVelocity, &
& atoleranceForPressure = atoleranceForPressure, &
& atoleranceForVelocity = atoleranceForVelocity, &
& toleranceForSteadyState = toleranceForSteadyState, &
& tFluidMaterials=tFluidMaterials, &
& tDirichletBCForPressure=tDirichletBCForPressure, &
& tDirichletBCForVelocity=tDirichletBCForVelocity, &
& baseInterpolationForSpace=baseInterpolationForSpace, &
& baseContinuityForSpace=baseContinuityForSpace, &
& quadratureTypeForSpace=quadratureTypeForSpace, &
& refPressureNode=refPressureNode, &
& refPressure=refPressure &
& )
Setting parameters for linear solver.
CALL SetLinSolverParam( &
& param=param, &
& solverName=ls_solverName,&
& preconditionOption=ls_preconditionOption, &
& convergenceIn=ls_convergenceIn, &
& convergenceType=ls_convergenceType, &
& maxIter=ls_maxIter, &
& relativeToRHS=ls_relativeToRHS, &
& KrylovSubspaceSize=ls_KrylovSubspaceSize, &
& rtol=ls_rtol, &
& atol=ls_atol )
Initiate domain by reading data from a domain file.
CALL domainFile%Initiate( filename=domainFileName, MODE="READ" )
CALL domainFile%Open()
CALL dom%Initiate( domainFile, "" )
CALL domainFile%Deallocate()
Initiate the kernel.
CALL obj%Initiate(param=param, dom=dom )
Add fluid material to kernel. To do so, we first create an instance of MeshSelection. Then, we add this instance to the kernel.
CALL region%Initiate( isSelectionByMeshID=.TRUE. )
CALL region%Add( dim=dom%GetNSD(), meshID=fluid_meshID )
CALL SetFluidMaterialParam( &
& param=param, &
& name="fluidMaterial", &
& massDensity=fluid_massDensity, &
& dynamicViscosity = fluid_dynamicViscosity, &
& stressStrainModel=fluid_stressStrainModel )
CALL SetNewtonianFluidModelParam( &
& param = param, &
& dynamicViscosity = fluid_dynamicViscosity )
CALL obj%AddFluidMaterial( &
& materialNo=1, &
& materialName="fluidMaterial", &
& param=param, &
& region=region)
CALL region%Deallocate()
Now we show how to add dirichlet boundary condition. To this end first we create an instance of MeshSelection to select the region of the mesh. Then we define the dirichlet bonundary condition, and pass these two information to kernel.
set parameters for dirichlet boundary condition:
#define BOTTOM 1
#define RIGHT 2
#define TOP 3
#define LEFT 4
CALL SetDirichletBCParam( &
& param=param, &
& name="V2=0", &
& idof=2, &
& nodalValueType=Constant, &
& useFunction=.FALSE. )
select the mesh region:
CALL region%Initiate( isSelectionByMeshID=.TRUE. )
CALL region%Add( dim=obj%nsd-1, meshID=[BOTTOM, TOP, LEFT] )
CALL region%Set()
Add dirichlet boundary condition and the region to kernel:
CALL obj%AddVelocityDirichletBC( &
& dbcNo=1, &
& param=param, &
& boundary=region )
dbc => obj%GetVelocityDirichletBCPointer( dbcNo=1 )
CALL dbc%Set( ConstantNodalValue=0.0_DFP )
dbc=>NULL()
AddDirichletBC, V1=U, set parameters for dirichlet boundary condition:
CALL SetDirichletBCParam( &
& param=param, &
& name="UpstreamV1", &
& idof=1, &
& nodalValueType=Constant, &
& useFunction=.FALSE. )
select the mesh region:
CALL region%Deallocate()
CALL region%Initiate( isSelectionByMeshID=.TRUE. )
CALL region%Add( dim=obj%nsd-1, meshID=[LEFT] )
CALL region%Set()
Add dirichlet boundary condition and the region to kernel:
CALL obj%AddVelocityDirichletBC( &
& dbcNo=2, &
& param=param, &
& boundary=region )
dbc => obj%GetVelocityDirichletBCPointer( dbcNo=2 )
CALL dbc%Set( ConstantNodalValue=0.01_DFP )
dbc=>NULL()
CALL region%Deallocate()
AddDirichletBC, P=0 set parameters for dirichlet boundary condition:
Display the kernel.
CALL obj%Display("")
cleanup
CALL obj%Deallocate()
CALL dom%Deallocate()
CALL param%Deallocate(); CALL FPL_FINALIZE()
END PROGRAM main