AddPressureDirichletBC
This routine sets the Dirichlet boundary condition for pressure field in AbstractSteadyStokes_ kernel.
- It also makes the
obj%DBCForPressure(dbcNo) dbcNoshould be lesser than total dirichlet boundary condition for pressure field
Interface
- ܀ Interface
- ️܀ See example
- ↢
INTERFACE
MODULE SUBROUTINE AddPressureDirichletBC(obj, dbcNo, param, boundary)
CLASS(SteadyStokes111_), INTENT(INOUT) :: obj
INTEGER(I4B), INTENT(IN) :: dbcNo
!! Dirichlet boundary nunber
TYPE(ParameterList_), INTENT(IN) :: param
!! parameter for constructing [DirichletBC_](DirichletBC_.md).
TYPE(MeshSelection_), INTENT(IN) :: boundary
!! Boundary region
END SUBROUTINE AddPressureDirichletBC
END INTERFACE
In this example we will learn how to add pressure and velocity dirichlet boundary condition
PROGRAM main
USE easifemBase
USE easifemClasses
USE easifemMaterials
USE easifemKernels
USE SteadyStokes111_Class
IMPLICIT NONE
TYPE( SteadyStokes111_ ) :: obj
TYPE( ParameterList_ ) :: param
TYPE( HDF5File_ ) :: domainFile
TYPE( Domain_ ) :: dom
INTEGER( I4B ), PARAMETER :: refPressureNode=2
REAL( DFP ), PARAMETER :: refPressure = 0.0_DFP
INTEGER( I4B ), PARAMETER :: tDirichletBCForVelocity = 2
INTEGER( I4B ), PARAMETER :: tDirichletBCForPressure = 0
INTEGER( I4B ), PARAMETER :: tFluidMaterials= 1
INTEGER( I4B ), PARAMETER :: stabParamOption= 1
LOGICAL( LGT ), PARAMETER :: isSubscalePressure = .FALSE.
LOGICAL( LGT ), PARAMETER :: isBoundarySubscale = .FALSE.
REAL( DFP ), PARAMETER :: gravity(3)=[0.0, -9.8, 0.0]
LOGICAL( LGT ), PARAMETER :: isConservativeForm = .TRUE.
CHARACTER( * ), PARAMETER :: engine="NATIVE_SERIAL"
CHARACTER( * ), PARAMETER :: domainFileName="./long_pipe_tri3.h5"
INTEGER( I4B ), PARAMETER :: CoordinateSystem = KERNEL_CARTESIAN
INTEGER( I4B ), PARAMETER :: maxIter = 100
REAL( DFP ), PARAMETER :: rtoleranceForPressure = 1.0E-6
REAL( DFP ), PARAMETER :: rtoleranceForVelocity = 1.0E-6
REAL( DFP ), PARAMETER :: atoleranceForPressure = 1.0E-6
REAL( DFP ), PARAMETER :: atoleranceForVelocity = 1.0E-6
REAL( DFP ), PARAMETER :: toleranceForSteadyState = 1.0E-6
CHARACTER(*), PARAMETER :: baseInterpolationForSpace="LagrangeInterpolation"
CHARACTER(*), PARAMETER :: baseContinuityForSpace="H1"
CHARACTER(*), PARAMETER :: quadratureTypeForSpace="GaussLegendre"
INTEGER(I4B), PARAMETER :: ls_solverName = LIS_GMRES
INTEGER(I4B), PARAMETER :: ls_preconditionOption= LEFT_PRECONDITION
INTEGER(I4B), PARAMETER :: ls_convergenceIn = convergenceInRes
INTEGER(I4B), PARAMETER :: ls_convergenceType = relativeConvergence
INTEGER( I4B ), PARAMETER :: ls_maxIter = 100
LOGICAL( LGT ), PARAMETER :: ls_relativeToRHS = .TRUE.
INTEGER( I4B ), PARAMETER :: ls_KrylovSubspaceSize=20
REAL( DFP ) , PARAMETER :: ls_rtol=1.0E-10
REAL( DFP ) , PARAMETER :: ls_atol=1.0E-10
TYPE( MeshSelection_ ) :: region
INTEGER( I4B ), PARAMETER :: fluid_meshID(1) = [1]
REAL( DFP ), PARAMETER :: fluid_massDensity=1000.0
REAL( DFP ), PARAMETER :: fluid_dynamicViscosity=0.001_DFP
CHARACTER( LEN = * ), PARAMETER :: fluid_stressStrainModel="NewtonianFluidModel"
CLASS( DirichletBC_ ), POINTER :: dbc => NULL()
Set parameters for kernel.
CALL FPL_INIT(); CALL param%Initiate()
Set parameters for the kernel.
CALL SetSteadyStokes111Param( &
& param=param, &
& isConservativeForm=isConservativeForm, &
& gravity = gravity, &
& isSubscalePressure = isSubscalePressure, &
& isBoundarySubscale = isBoundarySubscale, &
& stabParamOption = stabParamOption, &
& domainFile = domainFileName, &
& engine=engine, &
& CoordinateSystem=KERNEL_CARTESIAN, &
& maxIter =maxIter, &
& rtoleranceForPressure = rtoleranceForPressure, &
& rtoleranceForVelocity = rtoleranceForVelocity, &
& atoleranceForPressure = atoleranceForPressure, &
& atoleranceForVelocity = atoleranceForVelocity, &
& toleranceForSteadyState = toleranceForSteadyState, &
& tFluidMaterials=tFluidMaterials, &
& tDirichletBCForPressure=tDirichletBCForPressure, &
& tDirichletBCForVelocity=tDirichletBCForVelocity, &
& baseInterpolationForSpace=baseInterpolationForSpace, &
& baseContinuityForSpace=baseContinuityForSpace, &
& quadratureTypeForSpace=quadratureTypeForSpace, &
& refPressureNode=refPressureNode, &
& refPressure=refPressure &
& )
Setting parameters for linear solver.
CALL SetLinSolverParam( &
& param=param, &
& solverName=ls_solverName,&
& preconditionOption=ls_preconditionOption, &
& convergenceIn=ls_convergenceIn, &
& convergenceType=ls_convergenceType, &
& maxIter=ls_maxIter, &
& relativeToRHS=ls_relativeToRHS, &
& KrylovSubspaceSize=ls_KrylovSubspaceSize, &
& rtol=ls_rtol, &
& atol=ls_atol )
Initiate domain by reading data from a domain file.
CALL domainFile%Initiate( filename=domainFileName, MODE="READ" )
CALL domainFile%Open()
CALL dom%Initiate( domainFile, "" )
CALL domainFile%Deallocate()
Initiate the kernel.
CALL obj%Initiate(param=param, dom=dom )
Add fluid material to kernel. To do so, we first create an instance of MeshSelection. Then, we add this instance to the kernel.
CALL region%Initiate( isSelectionByMeshID=.TRUE. )
CALL region%Add( dim=dom%GetNSD(), meshID=fluid_meshID )
CALL SetFluidMaterialParam( &
& param=param, &
& name="fluidMaterial", &
& massDensity=fluid_massDensity, &
& dynamicViscosity = fluid_dynamicViscosity, &
& stressStrainModel=fluid_stressStrainModel )
CALL SetNewtonianFluidModelParam( &
& param = param, &
& dynamicViscosity = fluid_dynamicViscosity )
CALL obj%AddFluidMaterial( &
& materialNo=1, &
& materialName="fluidMaterial", &
& param=param, &
& region=region)
CALL region%Deallocate()
Now we show how to add dirichlet boundary condition. To this end first we create an instance of MeshSelection to select the region of the mesh. Then we define the dirichlet bonundary condition, and pass these two information to kernel.
set parameters for dirichlet boundary condition:
#define BOTTOM 1
#define RIGHT 2
#define TOP 3
#define LEFT 4
CALL SetDirichletBCParam( &
& param=param, &
& name="V2=0", &
& idof=2, &
& nodalValueType=Constant, &
& useFunction=.FALSE. )
select the mesh region:
CALL region%Initiate( isSelectionByMeshID=.TRUE. )
CALL region%Add( dim=obj%nsd-1, meshID=[BOTTOM, TOP, LEFT] )
CALL region%Set()
Add dirichlet boundary condition and the region to kernel:
CALL obj%AddVelocityDirichletBC( &
& dbcNo=1, &
& param=param, &
& boundary=region )
dbc => obj%GetVelocityDirichletBCPointer( dbcNo=1 )
CALL dbc%Set( ConstantNodalValue=0.0_DFP )
dbc=>NULL()
AddDirichletBC, V1=U, set parameters for dirichlet boundary condition:
CALL SetDirichletBCParam( &
& param=param, &
& name="UpstreamV1", &
& idof=1, &
& nodalValueType=Constant, &
& useFunction=.FALSE. )
select the mesh region:
CALL region%Deallocate()
CALL region%Initiate( isSelectionByMeshID=.TRUE. )
CALL region%Add( dim=obj%nsd-1, meshID=[LEFT] )
CALL region%Set()
Add dirichlet boundary condition and the region to kernel:
CALL obj%AddVelocityDirichletBC( &
& dbcNo=2, &
& param=param, &
& boundary=region )
dbc => obj%GetVelocityDirichletBCPointer( dbcNo=2 )
CALL dbc%Set( ConstantNodalValue=0.01_DFP )
dbc=>NULL()
CALL region%Deallocate()
AddDirichletBC, P=0 set parameters for dirichlet boundary condition:
Display the kernel.
CALL obj%Display("")
cleanup
CALL obj%Deallocate()
CALL dom%Deallocate()
CALL param%Deallocate(); CALL FPL_FINALIZE()
END PROGRAM main