Skip to main content

LinearStaticCDR example 12

!!! note "" Example 2.6.2 from Donea and Huerta 2003 text book.

Mesh used in this example is given below.

  • domain \left \[0,1 \right \]
  • ϕ(0)=0,ϕ(1)=1\phi(0)=0, \phi(1)=1
  • ν=1\nu=1
  • Pe=0.25,0.9,5.0Pe=0.25, 0.9, 5.0 this is obtained by changing the velocity
  • h=0.1h=0.1
PROGRAM main
USE easifemBase
USE easifemClasses
USE easifemMaterials
USE easifemKernels
USE LinearStaticCDR_Class
IMPLICIT NONE
TYPE(LinearStaticCDR_) :: obj
TYPE(ParameterList_) :: param
TYPE(Domain_) :: dom
TYPE( HDF5File_ ) :: domainFile
TYPE( HDF5File_ ) :: outfile
TYPE( MeshSelection_ ) :: region
CLASS( DirichletBC_ ), POINTER :: dbc
CHARACTER( LEN = * ), PARAMETER :: &
& domainfilename="./test14.domain.h5"
CHARACTER( LEN = * ), PARAMETER :: &
& outfileName="./test14a.output.h5"
INTEGER(I4B), PARAMETER :: tMaterials = 1, &
& tDirichletBC=2, &
& solverName = LIS_GMRES, &
& preconditionOption=LEFT_PRECONDITION, &
& convergenceIn = convergenceInRes, &
& convergenceType=relativeConvergence, &
& maxIter = 100, &
& KrylovSubspaceSize=20
REAL(DFP), parameter :: leftphi=0.0, &
& rightphi=1.0, h=0.1, pe=0.25, nu=1.0
REAL(DFP), parameter :: cvel = pe * 2.0 * nu / h

!!! note "ParameterList" Initiate an instance of [[ParameterList_]]

    CALL FPL_INIT(); CALL param%Initiate()

!!! note "LinearStaticCDR" Set the PARAMETER for [[LinearStaticCDR_]]

    CALL SetLinearStaticCDRParam( param=param, &
& engine="NATIVE_SERIAL", &
& isConservative=.FALSE., &
& coordinateSystem=KERNEL_2D, &
& tMaterials=tMaterials, &
& tDirichletBC=tDirichletBC, &
& domainFile=domainFileName, &
& baseContinuity="H1", &
& baseInterpolation="LagrangeInterpolation", &
& quadratureType="GaussLegendre" )

!!! note "LinSolver" Set the PARAMETER for [[LinSolver_]].

    CALL SetLinSolverParam( &
& param=param, &
& solverName=solverName,&
& preconditionOption=preconditionOption, &
& convergenceIn=convergenceIn, &
& convergenceType=convergenceType, &
& maxIter=maxIter, &
& relativeToRHS=.TRUE., &
& KrylovSubspaceSize=KrylovSubspaceSize, &
& rtol=1.0D-10, &
& atol=1.0D-10 )

!!! note "Domain" Initiates computation domain.

    CALL domainFile%Initiate(filename=domainFileName, mode="READ")
CALL domainFile%Open()
CALL dom%Initiate( domainFile, '' )
CALL domainFile%Deallocate()

!!! note "LinearStaticCDR" Initiate an instace of [[LinearStaticCDR_]] kernel

    CALL obj%Initiate( param=param, dom=dom )

!!! note "addMaterial 1" Add another material and domain region in the [[LinearStaticCDR_]] kernel.

    CALL region%Initiate( isSelectionByMeshID=.TRUE. )
CALL region%Add( dim=2, meshID=[1] )
CALL SetSolidMaterialParam( param=param, &
& name="SolidMaterial", &
& massDensity=1.0_DFP, &
& diffusivity=nu )
CALL obj%AddMaterial( materialNo=1, materialName="SolidMaterial", &
& param=param, region=region )
CALL region%Deallocate()

!!! note "SetDirichletBC 1" Now we set the Dirichlet boundary condition. First we SELECT the mesh boundary, THEN we prescribe the boundary condition.

    CALL SetDirichletBCParam(param=param, name="ZeroDBC", idof=1, &
& nodalValueType=Constant, useFunction=.FALSE. )
CALL region%Initiate( isSelectionByMeshID=.TRUE.)
CALL region%Add( dim=1, meshID=[4] )
CALL obj%AddDirichletBC( dbcNo=1, boundary=region, param=param )
CALL region%Deallocate()
dbc => obj%GetDirichletBCPointer( dbcNo=1 )
CALL dbc%Set( ConstantNodalValue=leftphi ); dbc=>NULL()

!!! note "SetDirichletBC 2" Let us repeat the PROCEDURE mentioned above to prescribe another boundary condition.

    CALL SetDirichletBCParam(param=param, name="NonZeroDBC", idof=1, &
& nodalValueType=Constant, useFunction=.FALSE. )
CALL region%Initiate( isSelectionByMeshID=.TRUE.)
CALL region%Add( dim=1, meshID=[2] )
CALL obj%AddDirichletBC( dbcNo=2, boundary=region, param=param )
CALL region%Deallocate()
dbc => obj%GetDirichletBCPointer( dbcNo=2 )
CALL dbc%Set( ConstantNodalValue=rightphi ); dbc=>NULL()

!!! note "Set" Now that we are done setting the kernels properties, we will CALL Set method.

    CALL obj%set()

!!! note "SetVelocity" Let us set the convective velocity

    CALL obj%SetVelocity(constantVelocity=[cvel, 0.0_DFP])

!!! note "AssembleTanmat" Let us assemble the tangent matrix.

   CALL obj%AssembleTanMat()
CALL obj%AssembleRHS()
CALL obj%Assemble()

!!! note "Solve" solve the system of linear equations.

    CALL obj%Solve()
CALL obj%Update(reset=.true.)

!!! note "Export" Now we export the kernel [[HDF5File_]] file

    CALL outfile%Initiate(outfileName, "NEW")
CALL outfile%Open()
CALL obj%WriteData(outfile, "/1")
CALL outfile%Deallocate()

!!! settings "Cleanup"

    CALL obj%Deallocate( )
CALL dom%Deallocate()
CALL param%Deallocate()
CALL FPL_FINALIZE()
END PROGRAM main