LinearStaticCDR example 12

!!! note "" This example shows the USE of Solvemethod

Mesh used in this example is given below.

Use association

• [[HDF5File_]]
• [[MSHFile_]]
• [[ParameterList_]]
• [[Domain_]]
• [[MeshSelection_]]

Usage

Usage

PROGRAM main
    USE easifemBase
    USE easifemClasses
    USE easifemMaterials
    USE easifemKernels
    USE LinearStaticCDR_Class
    IMPLICIT NONE
    TYPE(LinearStaticCDR_) :: obj
    TYPE(ParameterList_) :: param
    TYPE(Domain_) :: dom
    CHARACTER( LEN = * ), PARAMETER :: domainFileName="./mesh.h5"
    CHARACTER( LEN = * ), PARAMETER :: &
        & outfileName="./LinearStaticCDR.output.h5"
    TYPE( HDF5File_ ) :: domainFile
    TYPE( HDF5File_ ) :: outfile
    TYPE( MeshSelection_ ) :: region
    INTEGER(I4B), PARAMETER :: tMaterials = 2, tDirichletBC=2, &
      & solverName = LIS_GMRES, preconditionOption=LEFT_PRECONDITION, &
      & convergenceIn = convergenceInRes, &
      & convergenceType=relativeConvergence, &
      & maxIter = 100, &
      & KrylovSubspaceSize=20
    INTEGER(I4B) :: ii
    CLASS( DirichletBC_ ), POINTER :: dbc

!!! note "" Initiate an instance of [[ParameterList_]]

    CALL FPL_INIT(); CALL param%Initiate()

!!! note "" Set the PARAMETER for [[LinearStaticCDR_]]

    CALL SetLinearStaticCDRParam( param=param, &
      & engine="NATIVE_SERIAL", &
      & isConservative=.TRUE., &
      & coordinateSystem=KERNEL_2D, &
      & tMaterials=tMaterials, &
      & tDirichletBC=tDirichletBC, &
      & domainFile=domainFileName, &
      & baseContinuity="H1", &
      & baseInterpolation="LagrangeInterpolation", &
      & quadratureType="GaussLegendre" )

!!! note "" Set the PARAMETER for [[LinSolver_]].

    CALL SetLinSolverParam( &
      & param=param, &
      & solverName=solverName,&
      & preconditionOption=preconditionOption, &
      & convergenceIn=convergenceIn, &
      & convergenceType=convergenceType, &
      & maxIter=maxIter, &
      & relativeToRHS=.TRUE., &
      & KrylovSubspaceSize=KrylovSubspaceSize, &
      & rtol=1.0D-10, &
      & atol=1.0D-10 )

!!! note "" Initiates computation domain.

    CALL domainFile%Initiate(filename=domainFileName, mode="READ")
    CALL domainFile%Open()
    CALL dom%Initiate( domainFile, '' )
    CALL domainFile%Deallocate()

!!! note "" Initiate an instace of [[LinearStaticCDR_]] kernel

    CALL obj%Initiate( param=param, dom=dom )

!!! note "addMaterial 1" Add another material and domain region in the [[LinearStaticCDR_]] kernel.

    CALL region%Initiate( isSelectionByMeshID=.TRUE. )
    CALL region%Add( dim=2, meshID=[1] )
    CALL SetSolidMaterialParam( param=param, name="SolidMaterial", &
      & massDensity=1.0_DFP, diffusivity=1.0_DFP )
    CALL obj%AddMaterial( materialNo=1, materialName="SolidMaterial",  &
      & param=param, region=region )
    CALL region%Deallocate()

!!! note "addMaterial 2" Add another material and domain region in the [[LinearStaticCDR_]] kernel.

    CALL region%Initiate( isSelectionByMeshID=.TRUE. )
    CALL region%Add( dim=2, meshID=[2] )
    CALL SetSolidMaterialParam( param=param, name="SolidMaterial", &
      & massDensity=1.0_DFP, diffusivity=1.0_DFP )
    CALL obj%AddMaterial( materialNo=2, materialName="SolidMaterial",  &
      & param=param, region=region )
    CALL region%Deallocate()

!!! note "SetDirichletBC 1" Now we set the Dirichlet boundary condition. First we SELECT the mesh boundary, THEN we prescribe the boundary condition.

    CALL SetDirichletBCParam(param=param, name="ZeroDBC", idof=1, &
      & nodalValueType=Constant, useFunction=.FALSE. )
    CALL region%Initiate( isSelectionByMeshID=.TRUE.)
    CALL region%Add( dim=1, meshID=[3] )
    CALL obj%AddDirichletBC( dbcNo=1, boundary=region, param=param )
    CALL region%Deallocate()
    dbc => obj%GetDirichletBCPointer( dbcNo=1 )
    CALL dbc%Set( ConstantNodalValue=0.0_DFP ); dbc=>NULL()

!!! note "SetDirichletBC 2" Let us repeat the PROCEDURE mentioned above to prescribe another boundary condition.

    CALL SetDirichletBCParam(param=param, name="NonZeroDBC", idof=1, &
      & nodalValueType=Constant, useFunction=.FALSE. )
    CALL region%Initiate( isSelectionByMeshID=.TRUE.)
    CALL region%Add( dim=1, meshID=[6] )
    CALL obj%AddDirichletBC( dbcNo=2, boundary=region, param=param )
    CALL region%Deallocate()
    dbc => obj%GetDirichletBCPointer( dbcNo=2 )
    CALL dbc%Set( ConstantNodalValue=1.0_DFP ); dbc=>NULL()

!!! note "Set" Now that we are done setting the kernels properties, we will CALL Set method.

    CALL obj%set()

!!! note "SetVelocity" Let us set the convective velocity

    CALL obj%SetVelocity(constantVelocity=[0.1_DFP, 0.0_DFP])

!!! note "AssembleTanmat" Let us assemble the tangent matrix.

   CALL obj%AssembleTanMat()
   CALL obj%AssembleRHS()
   CALL obj%Assemble()

!!! note "Solve" solve the system of linear equations.

    CALL obj%Solve()

!!! note "Export" Now we export the kernel in [[HDF5File_]] file

    CALL outfile%Initiate(outfileName, "NEW")
    CALL outfile%Open()
    CALL obj%WriteData(outfile, "/1")
    CALL outfile%Deallocate()

!!! settings "Cleanup"

    CALL obj%Deallocate( )
    CALL dom%Deallocate()
    CALL param%Deallocate()
    CALL FPL_FINALIZE()
END PROGRAM main